Abnormal sound | 1, Sawtooth is not sharp enough or broken. 2, The workpiece clip is not tight enough. 3, Teeth with chips | 1, Regrinding sawtooth. 2, Stop&cleaning, check whether the number of cutting teeth is applicable 3, Check workpiece clamping device |
The workpiece is not vertical and varies in length | 1, When cutting chips, the feed rack collides and the shaking position is not accurate, and the platform is not calibrated properly when assembling. 2, Saw blade pressure deformation. 3, The cut material is not standard. 4,The saw blade went in too fast and the number of teeth is not correct. | 1, Often check the condition of the frame and positioning ruler,and just right the level of the machine . 2, Because the saw blade has a taper, so set up to avoid gravity pressure. 3, According to different materials to choose the correct knife speed, according to the thickness of the material to select the number of teeth. 4, Select a good material and standard material. |
Saw blade breakage and broken teeth | 1, Knife cover is not locked 2, Too fast 3, Saw tooth shape is incorrect, tooth number is improper 4, The feed is too large, bite too much, cutting overload 5, The starting sawing of the workpiece is too sharp, thin, too hard material. 6, The saw blade is too blunt, the cutting load is too large to tear the saw blade, or rotation occurs when cutting the workpiece. | 1, Lock the screw tight 2, Re-grinding saw tooth 3, Adjust the speed of the knife into the feed, must not be too fast 4, Cutting different materials require different shape and number of teeth , according to the needs of the correct selection of saw blade, not a saw blade can be used to cut any material. 5, Adjust the standard speed of the cut material. 6, Different cutting methods, need to do a special fixture to avoid material shaking. |
